QMS 1060, User Manual

Page: 200 / 311

Single In-Line
Memory
Modules
QMS 1060 Print System Reference 6-34
4 Insert the SIMM into the SIMM connector.
Hold the SIMM at a 45° angle to the controller board, with the
notch on the left side. Slide the SIMM into either SIMM connector,
and then push gently on it to make sure it is securely seated in
the connector.
» Note: You can insert a SIMM in either SIMM connector as long as
DRAM0, the SIMM connector farthest from you, is occupied.
45
°