QMS 1060, User Manual

Page: 267 / 311

Updated PCL 5
DOCs
C-15 Document Option Commands
Notes This command is identical to the
%%IncludeFeature:install DOC command. It is included
for backward compatibility.
All downloaded objects are by default temporary, and will
be deleted at the end of a job unless Administration/
Emulations/PCL5/Retain Temporary is set to On, True, Or
On Compatibility. If the file that the %%IncludeFeature:
resource command is attached to does not make the
downloaded font permanent and Administration/
Emulations/PCL5/Retain Temporary is not set, then those
objects are removed from the disk when the job completes.
A downloaded font can only be accessed by its ID if the
font is stored in the current resource. Regardless of its
resource, a font can be selected by its attributes.
Variables resource id
Purpose Identifies one of the possible locations for
downloaded objects.
Range 0-6
Default Internal system disk
(usually DSK6:/BIN/EMULATE/PCL/FONTS
Format Integer
Notes If no resource item is provided, the internal
default location is used; otherwise, this
parameter, which must be provided, specifies
one of the alternate locations. For most QMS
printers, resource 6 is the system disk.
object code
Purpose Assigns a code to an object such as a font,
macro, or pattern.
Range 0-32767
Range 0
Format Integer