Omron 3G3MV-PDRT2, User Manual

Page: 192 / 363

Chapter 7
7-42
Configurator Settings
7-2-14 Parameter Setting
■ Function
• The Inverter’s user parameters can be set with the Configurator.
• There are two ways to set the parameters, as follows:
• Several of the major parameters can be displayed and set.
(Inverter Parameters Tab Page)
• An individual parameter’s Instance/Attribute can be specified and set.
(Individual Parameters Tab Page)
Note 1. Some parameters cannot be set on the Inverter Parameters Tab Page settings. To change
these parameters, set them separately on the Individual Parameters Tab Page.
Note 2. When the 3G3FV is used, some parameters cannot be set from the Configurator (parame-
ters that cannot be changed using Class 64). Change these parameters using a Digital Op-
erator.
General Tab Page in
the Monitor Device
Window