Omron 3G3MV-PDRT2, User Manual

Page: 277 / 363

Chapter 10
10-19
Appendices
01 0F Power Actual Can be referenced in hexa-
decimal with the output
power monitor U-11/U1-08
minimum unit as 1 W.
Setting the attribute 1A
power scale enables a mul-
tiplication factor to be set. --- 0000 Yes No Word
10 Input Voltage Can be referenced in hexa-
decimal with the input volt-
age setting (200 or 400/E1-
01) minimum unit as 1 V.
Setting the attribute 1B volt-
age scale enables a multi-
plication factor to be set. --- 0000 Yes No Word
11 Output Voltage Can be referenced in hexa-
decimal with the output volt-
age monitor U-04/U1-06
minimum unit as 1 V.
Setting the attribute 1B volt-
age scale enables a multi-
plication factor to be set. --- 0000 Yes No Word
12 Accel Time Can be set and read in
hexadecimal with the accel-
eration time 1 n019/C1-01
and deceleration time 1
n020/C1-02 minimum unit
as 1 ms.
Depending on the accelera-
tion/ deceleration time unit
n018/C1-10 setting, num-
bers below 100 ms or 10
ms are truncated.
Setting the attribute 1C time
scale enables a multiplica-
tion factor to be set. 0.0 to 6,000.0
(0.00 to
600.00 2710 hex
(10.0 s) Yes Yes Word
13 Decel Time 2710 hex
(10.0 s) Yes Yes Word
14 Low Speed Limit
(See notes 2, 3,
and 4.) Can be set and read in
hexadecimal with the fre-
quency reference lower limit
n034/d2-02 and the fre-
quency reference upper
limit n033/d2-01 minimum
unit as 1 ms.
The minimum unit can be
set by the frequency refer-
ence setting and display
units in n035/o1-03.
n035/o1-03 = 0: 0.01 Hz
n035/o1-03 = 1: 0.01%
(100%: Max. frequency.)
n035/o1-03 = 2 to 39:
1 r/min
n035/o1-03 = 40 to 3,999:
Follow individual set values.
When r/min units are being
used, a multiplier can be set
in attribute 16 (the Speed
Scale setting). 0 to 109% of
maximum fre-
quency 0000 Yes Yes Word
15 High Speed
Limit
(See notes 2, 3,
and 4.) 0 to 110% of
maximum fre-
quency 0708 hex
(1,800 r/
min) Yes Yes Word
16 Speed scale Speed data unit selection
can be set and read. The
speed data unit value is cal-
culated as follows:
Unit = 1 [r/min] x 1/2
a
a: Speed scale set value
Set a negative value as its
2's complement.
−
15 to 15 (F1
to 0F hex)
00 Yes Yes Byte
Instance Attribute Name Content Setting range Default Read Write Size