Omron 3G3MV-PDRT2, User Manual

Page: 359 / 363

Chapter 10
10-101
Appendices
L2-04 0485 01 9F Voltage restart time 0.0 to 5.0 0.1 s 0.3 No
L2-05 0486 01 A0 Under voltage detection level (UV) 150 to
210 (150
to 420)
(See
note 1.) 1 V 190
(380)
(See
note 1.) No
L2-06 0487 01 A1 Not used. --- --- 0.0 ---
L3-01 0488 01 A2 Stall prevention during acceleration 0 to 2 1 1 No
L3-02 0489 01 A3 Stall prevention level during accelera-
tion 0 to 200 1% 150 No
L3-03 048A 01 A4 Stall prevention limit during accelera-
tion 0 to 100 1% 50 No
L3-04 048B 01 A5 Stall prevention during deceleration 0 to 3 1 1 No
L3-05 048C 01 A6 Stall prevention during run 0 to 2 1 1 No
L3-06 048D 01 A7 Stall prevention level during run 30 to 200 1% 160 No
L4-01 0490 01 A8 Frequency detection level 0.0 to
400.0 0.1 Hz 0.0 No
L4-02 0491 01 A9 Frequency detection width 0.0 to
20.0 0.1 Hz 2.0 No
L4-03 0492 01 AA Frequency detection level (+/
−
)
−
400.0 to
400.0
0.1 Hz 0.0 No
L4-04 0493 01 AB Frequency detection width (+/
−
) 0.0 to
20.0 0.1 Hz 2.0 No
L4-05 0494 01 AC Operation when frequency reference is
lost 0, 1 1 0 No
L5-01 0495 01 AD Number of auto restart attempts 0 to 10 1 0 No
L5-02 0496 01 AE Auto restart operation selection 0, 1 1 0 No
L6-01 0498 01 AF Torque detection selection 1 0 to 4 1 0 No
L6-02 0499 01 B0 Torque detection level 1 0 to 300 1% 150 No
L6-03 049A 01 B1 Torque detection time 1 0.0 to
10.0 0.1 s 0.1 No
L6-04 049B 01 B2 Torque detection selection 2 0 to 4 1 0 No
L6-05 049C 01 B3 Torque detection level 2 0 to 300 1% 150 No
L6-06 049D 01 B4 Torque detection time 2 0.0 to
10.0 0.1 s 0.1 No
L7-01 049E 01 B5 Forward torque limit 0 to 300 1% 200 No
L7-02 049F 01 B6 Reverse torque limit No
L7-03 04A0 01 B7 Forward regenerative torque limit No
L7-04 04A1 01 B8 Reverse regenerative torque limit No
L8-01 04A4 01 B9 DB resistor protection 0, 1 1 0 No
L8-02 04A5 01 BA Inverter overheat detection pre-alarm
level 50 to 130 1
°
C 95 No
L8-03 04A6 01 BB Operation after Inverter overheat pre-
alarm 0 to 3 1 3 No
Con-
stant
Regis-
ter num-
ber
(hex)
Class 64 (hex) Name Setting
range
Setting
unit
Default
setting
Write
during
opera-
tion
In-
stance
At-
tribute