Omron 3G3MV-PDRT2, User Manual

Page: 298 / 363

Chapter 10
10-40
Appendices
n138 018A 01 8A Feedback loss detection time 0.0 to
25.5 0.1 s 1.0 No
n139 018B 01 8B Energy-saving control selection 0, 1 1 0 No
n140 018C 01 8C Energy-saving control coefficient K2 0.0 to
6550 0.1 Differs
with
capacity. No
n141 018D 01 8D Energy-saving voltage lower limit at 60-
Hz output 0 to 120 1% 50 No
n142 018E 01 8E Energy-saving voltage lower limit at 6-
Hz output 0 to 25 1% 12 No
n143 018F 01 8F Power averaging time 1 to 200 1
(24 ms) 1 No
n144 0190 01 90 Probe operation voltage limit 0 to 100 1% 0 No
n145 0191 01 91 Probe operation control voltage step at
100% 0.1 to
10.0 0.1% 0.5 No
n146 0192 01 92 Probe operation control voltage step at
5% 0.1 to
10.0 0.1% 0.2 No
n147 --- --- --- Not used. --- --- --- ---
n148
n149 0195 01 95 Pulse train input scale 100 to
3300 1 (10 Hz) 2500 No
n150 0196 01 96 Multi-function analog output, pulse train
frequency selection 0, 1, 6,
12, 24,
36, 40 to
45 1 0 No
n151 0197 01 97 RS-422/485 communications time-over
detection selection 0 to 4 1 0 No
n152 0198 01 98 RS-422/485 communications fre-
quency reference/monitor unit selection 0 to 3 1 0 No
n153 0199 01 99 RS-422/485 communications slave
address (read only) 00 to 32 1 00 No
n154 019A 01 9A RS-422/485 baud rate selection (read
only) 0 to 3 1 2 No
n155 019B 01 9B RS-422/485 parity selection (read only) 0 to 2 1 0 No
n156 019C 01 9C RS-422/485 send wait time (read only) 10 to 65 1 ms 10 No
n157 019D 01 9D RS-422/485 RTS control selection 0, 1 1 0 No
n158 019E 01 9E Motor code 0 to 70 1 Differs
with
capacity. No
n159 019F 01 9F Energy-saving voltage upper limit at
60-Hz output 0 to 120 1% 120 No
n160 01A0 01 A0 Energy-saving upper limit voltage at 6-
Hz output 0 to 25 1% 16 No
n161 01A1 01 A1 Power detection width for probe opera-
tion switching 0 to 100 1% 10 No
n162 01A2 01 A2 Power detection filter constant 0 to 255 1 (4 ms) 5 No
n163 01A3 01 A3 PID output gain 0.0 to
25.0 0.1 1.0 No
n164 01A4 01 A4 PID feedback input block selection 0 to 5 1 0 No
n165 --- --- --- Not used. --- --- --- ---
n166 01A6 01 A6 Open input phase detection level 0 to 100 1% 0 No
n167 01A7 01 A7 Open input phase detection time 0 to 255 1 s 0 No
n168 01A8 01 A8 Open output phase detection level 0 to 100 1% 0 No
Con-
stant
Regis-
ter num-
ber
(hex)
Class 64 (hex) Name Setting
range
Setting
unit
Default
setting
Write
during
opera-
tion
In-
stance
At-
tribute