![background image](http://html1.mh-extra.com/html/omron/3g3mv-pdrt2/3g3mv-pdrt2_user-manual_743559193.webp)
Chapter 7
7-43
Configurator Settings
■
Setting Method 1: Inverter Parameters Tab Page in the Edit Device
Parameters Window
1.Click the
Inverter Parameters
Tab in the Edit Device Parameters Window.
2.Select the parameter group to be displayed from the pull-down menu in the
Parameter Group
field.
Note
The displayed parameter groups are classified as shown in the table under
Parameter Groups
and Parameters Not Set in Groups
on page 7-45. (The parameters that cannot be set depend
on the Inverter series.)
Set the parameters that cannot be set on the Inverter Parameters Tab Page by using the Indi-
vidual Parameters Tab Page. (The main parameters can be set on the Inverter Parameters Tab
Page.) Use a Digital Operator to set the parameters that cannot be set from the Configurator.
3.The parameter number and name will be displayed in the
Parameter Name
field, and the param-
eter’s set value is displayed in the
Value
field. Double-click the
Value
field of the parameter to be
changed, and change the set value.
Note 1.
Use either of the following two methods to set the parameter’s set value.
• Select the set value from the pull-down menu.
• Input the numerical value.
Note 2.
The details of the selected parameter are displayed in the
Help
Area. When setting the pa-
rameter, refer to the default value of the selected parameter that is displayed in the
Default
Area. For further details on the parameters, refer to the operation manual of the Inverter be-
ing used.
Select the parameter group.
Inverter Parameters Tab Page
in the Edit Device Parameters
Window
Summary of Contents for 3G3MV-PDRT2
