![background image](http://html1.mh-extra.com/html/omron/3g3mv-pdrt2/3g3mv-pdrt2_user-manual_743559176.webp)
Chapter 7
7-26
Configurator Settings
■
Monitoring Methods
●
Using the Monitor Device Window
• Click the
Operation Time
Tab in the Monitor Device Window.
• The following information will be displayed.
Note
The ON/OFF status of the Operation Time Over Monitor Flag can be checked on the General
Tab Page of the Monitor Device Window. When this flag is ON,
Operation Time Over
check box
will be selected.
●
Using the Maintenance Information Window
• Click the
Operation Time
Tab in the Maintenance Information Window.
Note
The differences between the
Operation Time
Tab Page
in the Monitor Device Window and in
the Maintenance Information Window are as follows:
• The
Operation Time
field in the Maintenance Information Window shows the value when the
maintenance information was refreshed and not the present value.
Item
Details
No.
Displays a number indicating the combination of start signals and end signals of
the operating time measurement.
An error icon will be displayed to the left of the number if the response time
exceeds the monitor value.
Equipment Name
Displays the name of each device.
Response Time
Displays the operating time (present value) of each device.
Peak Value
Displays the maximum operating time of each device.
Clear Error Button
Clears the Operation Time Over Flag in the Unit’s Status Area.
Note: This button is enabled when the
Status Hold
field is selected (to hold sta-
tuses) on the Operation Time Tab Page in the Edit Device Parameters Window.
Clear Peak Value Button
Clears the operation time peak value to zero.
Note: Select the device for which the peak value is to be cleared, and click the
Peak Value Clear Button to clear the value to zero.
Operation Time Tab Page in the
Monitor Device Window
Summary of Contents for 3G3MV-PDRT2
