Omron 3G3MV-PDRT2, User Manual

Page: 324 / 363

Chapter 10
10-66
Appendices
10-6 3G3PV Register Numbers, Classes, Instances, and
Attributes
10-6-1 Inputting Control/Frequency (Read/Write)
Note Set all unused bits to 0.
Class 64 Register No.
(Hex)
Contents
In-
stance
At-
tribute
--- --- 0000 Reserved
00 01 0001 Frequency reference
Bit 0 Run/stop command 1: Run 0: Stop
Bit 1 Reverse/stop command 1: Reverse 0: Stop
Bit 2 Multi-function input command 3
Bit 3 Multi-function input command 4
Bit 4 Multi-function input command 5
Bit 5 Multi-function input command 6
Bit 6 Multi-function input command 7
Bit 7 Not used.
Bit 8 External error 1: Error (EFO)
Bit 9 Error reset 1: Reset command
Bits 10 to 15 Not used.
00 02 0002 Frequency reference (Set units using parameter o1-03.)
--- --- 0003 to 0005 Not used.
00 06 0006 PID target value
00 07 0007 Analog output 1 setting (
−
11 V/
−
726 Dec. to 11 V/726 Dec.)
00 08 0008 Not used.
00 09 0009 Multi-function contact output setting
Bit 0 Contact output (terminal M1-M2) 1: ON 0: OFF
Bit 1 Contact output (terminal M3-M4) 1: ON 0: OFF
Bits 2 to 5 Not used.
Bit 6 Set error contact (terminal MA-MC) output using bit 7.
1: ON 0: OFF
Bit 7 Error contact (terminal MA-MC) 1: ON 0: OFF
Bits 8 to 15 Not used.
--- --- 000A to 000E Not used.
00 0F 000F Reference selection settings
Bit 0 Not used.
Bit 1 PID target value (register 0006H) 1: Enabled 0: Disabled
Bits 2 to 15 Not used.