Chapter 6
6-8
Message Communications
6-4
Motor Data Objects: Class 28 Hex
This section provides details on objects. There are fourteen types of objects:
• Identity objects (identification information): Class 01 hex
• Message router objects: Class 02 hex
• DeviceNet objects: Class 03 hex
• Assembly objects: Class 04 hex
• DeviceNet connection objects: Class 05 hex
• Input terminal control objects: Class 08 hex
• Output terminal control objects: Class 09 hex
• Motor data objects: Class 28 hex
• Control supervisor objects: Class 29 hex
• AC/DC drive objects: Class 2A hex
• Inverter parameter objects: Class 64 hex
• Unit parameter objects: Class 94 hex
• Unit manager objects: Class 95 hex
• Equipment manager objects: Class 97 hex
The three types of objects related to Inverters are the motor data, control supervisor, and AC/DC
drive objects. These are explained below and in subsequent sections. For details on the other types
of objects, refer to
10-2 Objects
.
Motor data objects are data and functions related to motors connected to Inverters. The motors that
can be connected to Inverters are squirrel-cage inductive motors, so the “Motor Type” is always “7.”
The motor's rated current and rated voltage can be set and read.
■
Support Service Code
Service code number (hex)
Service
0E
Get attribute single
10
Set attribute single
Summary of Contents for 3G3MV-PDRT2
