Mitsubishi Electric FR-A820-00046 (0.4K), Instruction Manual

Page: 689 / 1218

Parameters (A) Application parameters
FR-A800 5 - 487
5.14 (A) Application parameters
Purpose Parameter to set
Refer
to page
To operate by switching between
the inverter and the commercial
power supply operation
Electronic bypass function P.A000 to P.A005
Pr. 135 to Pr. 139,
Pr. 159
5-488
To reduce the standby power Self power management
P.A002, P.A006, P.A007,
P.E300 Pr. 30, Pr. 137,
Pr. 248, Pr. 254
5-497
To stop the motor with a
mechanical brake (operation
timing of mechanical brake)
Brake sequence function
P.A100 to P.A106,
P.F500, P.A108, P.A109,
P.A120 to P.A130 Pr. 278 to Pr. 285,
Pr. 292,
Pr. 639 to Pr. 651
5-501
To count the starting times to
determine timing of maintenance
Start count monitor P.A170, P.A171 Pr. 1410, Pr. 1411 5-507
To stop the motor with a
mechanical brake
(vibration control at stop-on-
contact)
Stop-on-contact control P.A200, P.A205, P.A206
Pr. 270, Pr. 275,
Pr. 276
5-509
To increase the speed at light load
Load torque high-speed
frequency control
P.D301, P.D302
P.A200 to P.A204
Pr. 4, Pr. 5,
Pr. 270 to Pr. 274
5-513
To strengthen or weaken the
frequency at a constant cycle
Traverse operation P.A300 to P.A305 Pr. 592 to Pr. 597 5-517
To suppress the swinging of an
object moved by a crane by crane
control
Swinging suppression control P.A310 to P.A317 Pr. 592 to Pr. 597 5-519
To adjust the stop position
(orientation control) of the rotating
shaft
Orientation control
P.A510 to P.A512,
P.A520, P.A524, P.A525,
P.A526 to P.A533,
P.A540 to P.A545,
P.C140, P.C141
Pr. 350 to Pr. 366,
Pr. 369, Pr. 393 to Pr.
399
5-522
To perform process control, such as
for the pump flow volume and air
volume
PID control
P.A600 to P.A607,
P.A610 to P.A615,
P.A621 to P.A625,
P.A640 to P.A644,
P.A650 to P.A655,
P.A661 to P.A665
Pr. 127 to Pr. 134,
Pr. 553, Pr. 554,
Pr. 575 to Pr. 577,
Pr. 609, Pr. 610,
Pr. 753 to Pr. 758,
Pr. 1015, Pr. 1134,
Pr. 1135, Pr. 1140,
Pr. 1141,
Pr. 1143 to Pr. 1149
5-543
PID pre-charge function
P.A616 to P.A620,
P.A656 to P.A660
Pr. 760 to Pr. 769 5-566
PID display adjustment
P.A630 to P.A633,
P.A670 to P.A673
C42 to C45
(Pr. 934, Pr. 935),
Pr. 1136 to Pr. 1139
5-562
To control the dance roll for
winding/unwinding
Dancer control
P.A601, P.A602, P.A605,
P.A606, P.A610, P.A611,
P.A613, P.A615, P.A624,
P.A625, P.F020, P.F021 Pr. 44, Pr. 45, Pr. 128,
Pr. 134, Pr. 609,
Pr. 610, Pr. 1134,
Pr. 1135
5-571
To continue operating at analog
current input loss
4 mA input check P.A680 to P.A682
Pr. 573, Pr. 777,
Pr. 778
5-434
To restart without stopping the
motor at instantaneous power
failure
Automatic restart after
instantaneous power failure /
flying start function for
induction motors
P.A700 to P.A705,
P.A710, P.F003
Pr. 57, Pr. 58,
Pr. 162 to Pr. 165,
Pr. 299, Pr. 611
5-581
Frequency search accuracy
improvement (V/F control,
offline auto tuning)
P.A700, P.A711, P.A712,
P.C110, P.C210
Pr. 96, Pr. 162,
Pr. 298, Pr. 463,
Pr. 560
5-471
Automatic restart after
instantaneous power failure /
flying start function for IPM
motors
P.A700, P.A702, P.F003,
P.F004 Pr. 57, Pr. 162,
Pr. 611
5-590
To decelerate the motor to a stop at
instantaneous power failure Power failure time
deceleration-to-stop function P.A730 to P.A735,
P.A785 Pr. 261 to Pr. 266,
Pr. 294
5-599
To operate with sequence program PLC function
P.A800 to P.A804,
P.A811 to P.A860
Pr. 414 to Pr. 417,
Pr. 498,
Pr. 1150 to Pr. 1199
5-606
To store the inverter running status
to a USB memory device
Trace function
P.A900 to P.A906,
P.A910 to P.A920,
P.A930 to P.A939
Pr. 1020 to Pr. 1047 5-610