Mitsubishi Electric FR-A820-00046 (0.4K), Instruction Manual

Page: 357 / 1218

Parameters Position control under vector control and PM sensorless vector control
FR-A800 5 - 155
5.5 Position control under vector control and PM sensorless
vector control
5.5.1 About position control
●
In position control, speed commands, which are calculated to eliminate the difference between
the command pulse (parameter setting) and the estimated feedback pulse, are output to rotate
the motor.
●
This inverter can perform simple positioning by contact input or position control by simple pulse
input to the inverter.
Purpose Parameter to set
Refer to
page
To perform Simple position control
by setting parameters To give parameter position
command
P.B000,
P.B020 to P.B050,
P.B101,
P.B120 to P.B188,
P.B190 to P.B195 Pr. 419,
Pr. 464 to Pr. 494,
Pr. 1221 to
Pr. 1290,
Pr. 1292, Pr. 1293
5-138
To perform position control by pulse
input to the inverter Simple pulse train position
command P.B000,
P.B009, P.B010 Pr. 419,
Pr. 428, Pr. 429
5-176
To adjust the gear ratio of the motor
and machine
Electronic gear settings
P.B001,
P.B002, P.B005 Pr. 420,
Pr. 421,Pr. 424
5-185
To improve the precision of the
position control
Setting the position
adjustment parameters P.B007, P.B008,
P.B192 to P.B195
Pr. 426, Pr. 427,
Pr. 1294 to
Pr. 1297
5-187
Position control gain
adjustment
P.B003,
P.B004, P.B006, P.B012,
P.B013, P.G220,
P.G224, P.C114 Pr. 422, Pr. 423,
Pr. 425, Pr. 446,
Pr. 828, Pr. 877,
Pr. 880, Pr. 1298
5-189
To monitor pulses
Pulse monitor selection P.B011 Pr. 430 5-185
Cumulative pulse monitor P.M610 to P.M613 Pr . 635 to Pr. 638 5-185
Vector Vector Vector PM PM PM