Mitsubishi Electric FR-A820-00046 (0.4K), Instruction Manual

Page: 542 / 1218

(M) Monitor display and monitor output signal Parameters
5 - 340
5.11 (M) Monitor display and monitor output signal
Purpose Parameter to set
Refer to
page
To display the motor speed.
To set by rotations per minute.
Speed display and
rotations per minute
setting
P.M000 to P.M002,
P.D030 Pr. 37, Pr. 144,
Pr. 505, Pr. 811
5-341
To change the monitored item on the
operation panel and parameter unit
Operation panel monitored
item selection, clearing the
cumulative monitor
P.M020 to P.M023,
P.M030, P.M031,
P.M044, P.M045,
P.M050 to P.M052,
P.M100 to P.M104
Pr. 52, Pr. 170,
Pr. 171, Pr. 268,
Pr. 290, Pr. 563,
Pr. 564, Pr. 774 to
Pr. 776, Pr. 891,
Pr. 992, Pr. 1018,
Pr.1106 to Pr.1108
5-344
To change the monitored item output
from the terminal FM(CA) and AM Terminal FM(CA) function
selection
P.M040 to P.M042,
P.M044, P.M300,
P.M301, P.D100 Pr. 54, Pr. 55, Pr. 56,
Pr. 158, Pr. 290,
Pr. 291, Pr. 866
5-358
To adjusting the terminal FM, terminal
CA, and AM output Terminal FM(CA), AM
calibration
P.M310, P.M320,
P.M321,
P.M330 to P.M334
Pr. 867, Pr. 869,
C0 (Pr. 900),
C1 (Pr. 901),
C8 (Pr. 930) to
C11 (Pr. 931)
5-365
To check the effects of energy saving Energy saving monitor
P.M023, P.M100,
P.M200 to P.M207,
P.M300, P.M301 Pr. 52, Pr. 54,
Pr. 158, Pr. 891 to
Pr. 899
5-197
To assign functions to the output
terminals Output terminal function
assignment
P.M400 to P.M406,
P.M410 to P.M412,
P.M431 Pr. 190 to Pr. 196,
Pr. 289,
Pr. 313 to Pr. 315
5-378
To detect the output frequency
Up-to-frequency sensitivity
Output frequency
detection
Low speed detection
P.M440 to P.M446
Pr. 41 to Pr. 43,
Pr. 50, Pr. 116,
Pr. 865, Pr. 870
5-390
To detect the output current
Output current detection
Zero current detection
P.M460 to P.M464
Pr. 150 to Pr. 153,
Pr. 166, Pr. 167
5-394
To detecting the output torque Output torque detection P.M470 Pr. 864 5-396
To use the remote output function Remote output P.M500 to P.M502 Pr. 495 to Pr. 497 5-397
To use the analog remote output
function
Analog remote output P.M530 to P.M534 Pr. 655 to Pr. 659 5-399
To output the fault code from a
terminal
Fault code output function P.M510 Pr. 76 5-402
To detect the specified output power
Pulse train output of
output power
P.M520 Pr. 799 5-403
To detect the control circuit
temperature. Control circuit temperature
monitor
P.M060 Pr. 663 5-404
To monitor pulses Cumulative pulse monitor P.M610 to P.M613 Pr. 635 to Pr. 638 5-180
To output divided encoder pulses
Encoder pulse dividing
output
P.M600 Pr. 863 5-404