Mitsubishi Electric FR-A820-00046 (0.4K), Instruction Manual

Page: 470 / 1218

(F) Setting of acceleration/deceleration time and acceleration/deceleration pattern Parameters
5 - 268
5.8.7 Lift operation (automatic acceleration/deceleration)
The inverter can be operated according to the load pattern of the lift with counterweight.
The setting range for the FR-A820-03160(55K) or lower and FR-A840-01800(55K) or lower.
The setting range for the FR-A820-03800(75K) or higher and FR-A840-02160(75K) or higher.
Lift operation (Pr. 292 = "5, 6")
●
When Pr. 292 "Automatic acceleration/deceleration" is set to "5" or "6", the lift operation is selected,
and each setting is changed, as shown in the table below.
●
During power driving, sufficient torque is generated, and during regenerative driving and during
driving with no load, the torque boost setting is adjusted automatically so as not to activate the
overcurrent protective function by overexcitation.
Pr. Name
Initial
value
Setting range Description
292
F500
Automatic acceleration/
deceleration
0
0 Normal operation
1
Shortest acceleration/
deceleration (without brakes)
(Refer to
page 5-263.)
11
Shortest acceleration/
deceleration (with brakes)
3
Optimum acceleration/
deceleration
5
Lift operation 1 (stall prevention operation
level 150%)
6
Lift operation 2 (stall prevention operation
level 180%)
7, 8
Brake sequence 1, 2
(Refer to page 5-501.)
61
F510
Reference current 9999
0 to 500 A
Set the reference current during shortest
(optimum) acceleration/deceleration.
0 to 3600 A
9999
Rated output current value reference of the
inverter
64
F520
Starting frequency for
elevator mode
9999
0 to 10 Hz
Set the starting frequency for the lift
operation.
9999 Starting frequency is 2 Hz.
Name Normal operation
Multi-
rating
(Pr. 570)
Lift operation (Pr. 292)
5 6
Torque boost Pr. 0 (6/4/3/2/1%)
Changes according to the output current
(as shown below)
Starting frequency Pr. 13 (0.5 Hz) Pr. 64 (2 Hz) Accelerate after 100 ms hold.
Base frequency voltage Pr. 19 (9999) 220 V (440 V )
Stall prevention operation level Pr. 22 (150%), etc.
0(SLD) 110% 115%
1(LD) 120% 140%
2(ND)
Initial value
150% 180%
3(HD) 200% 230%
Tab. 5-100: Valid values in the elevator mode
V/F V/F V/F