Mitsubishi Electric FR-A820-00046 (0.4K), Instruction Manual

Page: 123 / 1218

Installation and wiring Connection of stand-alone option units
FR-A800 2 - 93
Connection example with the FR-BR-(H) resistor unit
When wiring, make sure to match the terminal symbol (P/+, N/-) at the inverter side and at the
brake unit (FR-BU2) side. (Incorrect connection will damage the inverter and brake unit.)
When the power supply is 400 V class, install a stepdown transformer.
Be sure to remove the jumper across terminals PR and PX when using the FR-BU2 with the inverter
of FR-A820-00490(7.5K) or lower, FR-A840-00250(7.5K) or lower.
The wiring distance between the inverter and brake unit (FR-BU2), and between the brake unit
(FR-BU2) and resistor unit (FR-BR) must be within 5 m each. Even when the wire is twisted, the cable
length must be within 10 m.
$
The contact between TH1 and TH2 is closed in the normal status and is open at a fault.
I002409E
Fig. 2-64: Connection example with the FR-BR-(H) resistor unit
NOTE Do not remove the jumper across terminals P/+ and P1 except when connecting a DC reactor
(FR-HEL).
U
V
W
P/+
N/-
R/L1
S/L2
T/L3
M
PR
N/-
BUE
SD
P/+
P
A
B
C
FR-BU2
FR-BR
TH2
TH1
PR
MCCB
MC
MC
T
MC
PR
PX
Three-phase AC
power supply
ON OFF
Motor
≤
10 m
Inverter
$