Mitsubishi Electric FR-A820-00046 (0.4K), Instruction Manual

Page: 203 / 1218

Parameters
FR-A800 5 - 1
5 Parameters
The following marks are used to indicate the controls as below. (Parameters without any mark are
valid for all control.)
The setting range and the initial value of parameters differ depending on the structure or functions of
the inverter. The following common designations are used for each type of the inverter models.
Mark Control method Applied motor
V/F control
Three-phase induction motor Advanced magnetic flux vector control
Real sensorless vector control
Vector control
Three-phase induction motor, PM motor
PM sensorless vector control PM motor
Inverter model Common designation
FR-A8
첸
0 Standard model
FR-A8
첸
2 Separated converter type
FR-A8
첸
6 IP55 compatible model
FR-A8
첸첸
-GF Model with built-in CC-Link IE Field Network communication function (see note)
FR-A8
첸첸
-E Model with built-in Ethernet board (FR-A8ETH)
Tab. 5-1: Designation of the inverter model
NOTES The model with the symbol GF is not available in Europe. You can get the same functionality of
this model by installing the option FR-A8NCE (Art. no. 273102).
Upon delivery the FR-A800-E inverter models are not equipped with the RS-485 terminal block.
V/F V/F V/F
Magnetic flux Magnetic flux Magnetic flux
Sensorless Sensorless Sensorless
Vector Vector Vector
PM PM PM