Mitsubishi Electric FR-A820-00046 (0.4K), Instruction Manual

Page: 628 / 1218

(T) Multi-Function Input Terminal Parameters Parameters
5 - 426
5.12.6 Bias and gain for torque (magnetic flux) and set voltage (current)
The magnitude (slope) of the torque can be set as desired in relation to the torque setting signal (0 to
5 V DC, 0 to 10 V DC, or 4 to 20 mA).
Use Pr. 73 "Analog input selection" or Pr. 267 "Terminal 4 input selection" to switch among input 0 to
5 V DC, 0 to 10 V, and 4 to 20 mA. (Refer to page 5-406.)
The parameter number in parentheses is the one for use with the LCD operation panel and the
parameter unit.
Changing the function of analog input terminal
The initial value for terminal 1 used as analog input is set to speed setting auxiliary (speed limit aux-
iliary), and terminal 4 is set to speed command (speed control). To use the analog input terminal as
torque command, torque limit, or magnetic flux command, set Pr. 868 "Terminal 1 function assign-
ment", Pr. 858 "Terminal 4 function assignment" to change the function. (Refer to page 5-411.)
The magnetic flux command is valid under vector control only.
Pr. Name
Initial
value
Setting
range
Description
C16 (919)
T110
Terminal 1 bias command (torque) 0% 0 to 400%
Set the torque (magnetic flux) of the bias side of
terminal 1 input.
C17 (919)
T111
Terminal 1 bias (torque) 0% 0 to 300%
Set the converted % on bias side voltage of
terminal 1 input.
C18 (920)
T112
Terminal 1 gain command (torque) 150% 0 to 400%
Set the torque (magnetic flux) of the gain
(maximum) of terminal 1 input.
C19 (920)
T113
Terminal 1 gain (torque) 100% 0 to 300%
Set the converted % on the gain side voltage of
terminal 1 input.
C38 (932)
T410
Terminal 4 bias command (torque) 0% 0 to 400%
Set the torque (magnetic flux) of the bias side of
terminal 4 input.
C39 (932)
T411
Terminal 4 bias (torque) 20% 0 to 300%
Set the converted % on the bias side current
(voltage) of terminal 4 input.
C40 (933)
T412
Terminal 4 gain command (torque) 150% 0 to 400%
Set the torque (magnetic flux) of the gain
(maximum) of terminal 4 input.
C41 (933)
T413
Terminal 4 gain (torque) 100% 0 to 300%
Set the converted % on gain side current
(voltage) of terminal 4 input.
241
M043
Analog input display unit switchover 0
0 % display
Select the unit for analog input
display.
1
V/mA
display
Sensorless Sensorless Sensorless Vector Vector Vector PM PM PM