Mitsubishi Electric FR-A820-00046 (0.4K), Instruction Manual

Page: 255 / 1218

FR-A800 5 - 53
Parameters Parameter List
Setting can be made only when a vector control compatible option is installed.
Setting can be made only when the FR-A8AP is installed.
The setting is available only when the FR-A8AP or the FR-A8APR is installed.
The setting is available only when the FR-A8TP is installed.
$
The setting is available only when the FR-A8AP or the FR-A8TP is installed.
%
The parameter number in parentheses is the one for use with the LCD operation panel (FR-LU08) and the parameter
unit (FR-PU07).
&
Setting can be made only for the standard model.
'
Setting can be made only for the standard model and the IP55 compatible model.
*
The setting is available only for the FR-A800-GF or when a compatible plug-in option is installed.
(
The setting is available for the FR-A800-E or when a compatible plug-in option is installed.
G250 788
Low speed range torque
characteristic selection
5-81
G260 1121
Per-unit speed control reference
frequency
5-103
G261 1117
Speed control P gain 1 (per-unit
system)
5-103
G262 1119
Model speed control gain (per-unit
system)
5-115
G300 451
Second motor control method
selection 5-61,
5-153
G301 565
Second motor excitation current
break point
5-692
G302 566
Second motor excitation current
low-speed scaling factor
5-692
G311 830 Speed control P gain 2 5-103
G312 831 Speed control integral time 2 5-103
G313 834 Torque control P gain 2 5-150
G314 835 Torque control integral time 2 5-150
G315 833 Speed detection filter 2 5-194
G316 837 Torque detection filter 2 5-194
G350 747
Second motor low-speed range
torque characteristic selection
5-81
G361 1118
Speed control P gain 2 (per-unit
system)
5-103
Pr.
group
Pr. Name
Refer to
page
Tab. 5-16: Control Parameter (3)
G400 286 Droop gain 5-733
G401 287 Droop filter time constant 5-733
G402 288 Droop function activation selection 5-733
G403 994 Droop break point gain 5-733
G404 995 Droop break point torque 5-733
G410 653 Speed smoothing control 5-737
G411 654 Speed smoothing cutoff frequency 5-737
G420 679 Second droop gain 5-733
G421 680 Second droop filter time constant 5-733
G422 681
Second droop function activation
selection
5-733
G423 682 Second droop break point gain 5-733
G424 683 Second droop break point torque 5-733
G601 1003 Notch filter frequency 5-127
G602 1004 Notch filter depth 5-127
G603 1005 Notch filter width 5-127
G932 89
Speed control gain (Advanced
magnetic flux vector)
5-72
G942 569 Second motor speed control gain 5-72
Pr.
group
Pr. Name
Refer to
page
Tab. 5-16: Control Parameter (4)