Mitsubishi Electric FR-A820-00046 (0.4K), Instruction Manual

Page: 1132 / 1218

Outline dimension drawings Specifications
8 - 22
Dimensions table
NOTE Make sure to earth the earth terminal of the frame installation foot as well as the earth terminal in
the terminal box.
SF-V5RU
첸
K 1 2 3 5 7 11 15 18 22 — 30 37, 45 55
SF-V5RU
첸
K1 — 1 2 3 5 7 11 — 15 18 — 22, 30 37
SF-V5RU
첸
K3 — — 1 2 3 5 7 — 11 15 — 18, 22 30
SF-V5RU
첸
K4 — — — — 1 2 3 — — 5 7 — 11, 15
Frame No. 90L 100L 112M 132S 132M 160M 160L 180M 180L 200L 225S
Mass [kg] 24 33 41 52 62 99 113 138 160 200 238 255 320
Motor
A 256.5 284 278 303 322 412 434 438.5 457.5 483.5 500
B 114 128 135 152 171 198 220 225.5 242.5 267.5 277
C 90 100 112 132 132 160 160 180 180 200 225
D 183.6 207 228 266 266 318 318 363 363 406 446
E 70 80 95 108 108 127 127 139.5 139.5 159 178
F 62.5 70 70 70 89 105 127 120.5 139.5 152.5 143
H 198 203.5 226 265 265 316 316 359 359 401 446
I — 230 253 288 288 367 367 410 410 — —
KA 53 65 69 75 94 105 127 127 146 145 145
KG 65 78 93 117 117 115 115 139 139 487 533
KL(KP)
220
(210)
231 242 256 256 330 330 352 352 (546) (592)
L 425 477 478 542 580 735 779 790 828 909 932
M 175 200 230 256 256 310 310 335 335 390 428
ML — 212 242 268 268 — — — — — —
N 150 180 180 180 218 254 298 285 323 361 342
XB 56 63 70 89 89 108 108 121 121 133 149
Q — 60 60 80 80 — — — — — —
QK — 45 45 63 63 — — — — — —
R 168.5 193 200 239 258 323 345 351.5 370.5 425.5 432
S 24j6 28j6 28j6 38k6 38k6 42k6 42k6 48k6 55m6 60m6 65m6
T 7 7 7 8 8 8 8 9 10 11 11
U 4 4 4 5 5 5 5 5.5 6 7 7
W 8 8 8 10 10 12 12 14 16 18 18
Terminal
screw
size
U, V, W M6 M6 M6 M6 M6 M8 M8 M8 M8 M10 M10
A, B, (C) M4 M4 M4 M4 M4 M4 M4 M4 M4 M4 M4
G1, G2 M4 M4 M4 M4 M4 M4 M4 M4 M4 M4 M4
Tab. 8-11: Dimensions table (Unit: mm)
NOTES Install the motor on the floor and use it with the shaft horizontal.
Leave an enough clearance between the fan suction port and wall to ensure adequate cooling.
Also, check that the ventilation direction of a fan is from the opposite load side to the load side.
The size difference of top and bottom of the shaft center height is .
The 400 V class motor has "-H" at the end of its type name.
0
-0.5