Mitsubishi Electric FR-A820-00046 (0.4K), Instruction Manual

Page: 472 / 1218

(D) Operation command and frequency command Parameters
5 - 270
5.9 (D) Operation command and frequency command
Purpose Parameter to set
Refer to
page
To select the operation mode Operation mode selection P.D000 Pr. 79 5-271
To start up in Network operation
mode at power-ON Communication startup
mode selection
P.D000, P.D001 Pr. 79, Pr. 340 5-280
To select the command source
during communication operation
Operation and speed
command sources during
communication operation,
command source selection
P.D010 to P.D013
Pr. 338, Pr. 339,
Pr. 550, Pr. 551
5-282
To prevent motor from rotating
reversely Reverse rotation prevention
selection
P.D020 Pr. 78 5-291
To change the setting resolution of
speed
Set resolution switchover P.D030 Pr. 811 5-341
To change the setting resolution of
torque limit
Set resolution switchover P.D030 Pr. 811 5-341
To set the frequency by pulse train
input
Pulse train input
P.D100, P.D101,
P.D110, P.D111 Pr. 291,
Pr. 384 to Pr. 386
5-292
To perform JOG operation JOG operation P.D200, P.F002 Pr. 15, Pr. 16 5-296
To control frequency with
combinations of terminals
Multi-speed operation P.D300 to P.D315
Pr. 28,
Pr. 4 to Pr. 6,
Pr. 24 to Pr. 27,
Pr. 232 to Pr. 239
5-299
To select torque command method
during torque control Torque command source
selection
P.D400 to P.D402 Pr. 804 to Pr. 806 5-138