Mitsubishi Electric FR-A820-00046 (0.4K), Instruction Manual

Page: 113 / 1218

Installation and wiring Parameter settings for a motor with encoder
FR-A800 2 - 83
2.9 Parameter settings for a motor with encoder
Parameter for the encoder (Pr. 359, Pr. 369)
●
Set the encoder specifications.
The above parameters can be set when a vector control compatible option is mounted.
●
The following table shows parameters to be set according to a vector control compatible option
to be used.
Pr. Name
Initial
value
Setting
range
Description
359
C141
852
C241
Encoder
rotation
direction
1
0
Set when using a motor for
which forward rotation
(encoder) is clockwise (CW)
viewed from the shaft. Set for the operation at 120 Hz
or less.
100
Set for the operation at a
frequency higher than 120 Hz.
1
Set when using a motor for
which forward rotation
(encoder) is counterclockwise
(CCW) viewed from the shaft. Set for the operation at 120 Hz
or less.
101
Set for the operation at a
frequency higher than 120 Hz.
369
C140
851
C240
Number of
encoder pulses
1024 0–4096
Set the number of encoder pulses output.
Set the number of pulses before it is multiplied by 4.
Tab. 2-37: Parameter for the encoder
Item
Parameters for option
FR-A8AP FR-A8APR FR-A8TP
Encoder/Resolver rotation direction Pr. 359 Pr. 852
Number of detector pulses Pr. 369 — (fixed 1024 pulses) Pr. 851
Tab. 2-38: Parameter settings for different options
CW
CCW