Mindray WATO EX-65, Operator'S Manual

Page: 81 / 276

5-15
5.3.9.2 Display BIS EEG Waveform
If your anesthesia machine is configured with BIS module, BIS EEG and BIS Trend
waveforms are displayed as shown below.
BIS EEG waveform:
BIS Trend waveform:
5.3.9.3 Set BIS EEG Waveform
1. Select the waveform area to access the waveform setup menu.
2. Select [
Waveform
] and select [
BIS EEG
].
3. Select [
Sweep
] and set waveform sweep speed to an appropriate value. The greater the
value is, the faster the waveform sweeps, the wider the waveform is.
4. Select [
Scale
] and set waveform scale to an appropriate value.
5. Select [
Filters
] and toggle between [
ON
] and [
OFF
].
6. Select to exit the current menu.
5.3.9.4 Other Settings
For details, refer to
10 BIS Monitoring
.