Mindray WATO EX-65, Operator'S Manual

Page: 19 / 276

1-3
WARNING
z
Use appropriate electrodes and place them according to the instructions provided
by the manufacturer. The display restores to normal within 10 seconds after
defibrillation.
1.1.3 Cautions
CAUTION
z
To ensure patient safety, use only parts and accessories specified in this manual.
z
At the end of its service life, the equipment, as well as its accessories, must be
disposed of in compliance with the guidelines regulating the disposal of such
products.
z
Magnetic and electrical fields are capable of interfering with the proper
performance of the equipment. For this reason make sure that all external devices
operated in the vicinity of the equipment comply with the relevant EMC
requirements. Mobile phone, X-ray equipment or MRI devices are a possible
source of interference as they may emit higher levels of electromagnetic radiation.
z
This system operates correctly at the electrical interference levels identified in this
manual. Higher levels can cause nuisance alarms that may stop mechanical
ventilation. Pay attention to false alarms caused by high-intensity electrical fields.
z
Before connecting the equipment to the power line, check that the voltage and
frequency ratings of the power line are the same as tube indicated on the
equipment’s label or in this manual.
z
Always install or carry the equipment properly to avoid damage caused by drop,
impact, strong vibration or other mechanical force.
z
The anesthesia machine keeps stable with a 10º tilt in typical configuration. Do not
hang articles on both sides of the anesthesia machine for fear of getting tilted.