Mindray WATO EX-65, Operator'S Manual

Page: 75 / 276

5-9
5.3.3.3 Other Settings
For details, refer to
8CO2 Monitoring
and
9AG and O2 Concentration Monitoring
.
NOTE
z
As required by the relevant international rules and regulations, CO2 concentration
monitoring needs to be performed when the anesthesia machine is used on the
patient. If your anesthesia machine is not configured with such monitoring
function, use a qualified monitor for CO2 concentration monitoring.
5.3.4 Pressure Monitoring
5.3.4.1 Display Pressure Parameters
On the normal screen, the pressure related parameters are displayed as shown below.
„ [
Ppeak
]: Peak pressure
„ [
Pplat
]: Plateau pressure
„ [
PEEP
]: Positive end-expiratory pressure
5.3.4.2 Display Paw Waveform
5.3.4.3 Set Paw Waveform
1. Select the Paw waveform area to access the [
Paw Waveform Setup
] menu.
2. Select [
Waveform
] and select [
Paw
].
3. Select [
Sweep
] and toggle between [
6.25 mm/s
] and [
12.5 mm/s
].The greater the value
is, the faster the waveform sweeps.