Mindray WATO EX-65, Operator'S Manual

Page: 68 / 276

5-2
5.1.1 Standby Screen
When the anesthesia machine is not in use for a short period of time, entering standby status
can help save power and extend service life of the machine.
The anesthesia machine enters standby status automatically after start-up. To enter standby
status, you can also push the key in operating mode and then select [
Ok
] from the
pop-up menu. The following figure shows the standby screen.
In standby status, the following changes occur to the system:
„ Displaying monitored parameters and waveforms is disabled. The system is in standby
status.
„ The ventilator stops supplying gases.
„ The parameters can be set. When the standby status exits, the system will operate based
on the final settings in standby status.
„ Physiological alarms are cleared automatically. Technical alarms function normally.
„ The gas module enters standby status.
To exit standby, push the key in standby mode and then select [
Ok
] from the pop-up
menu.