Mindray DC-T6, Operator'S Manual

Page: 167 / 347

Stress Echo
6-13
1. Click [New] button on the right of the Protocol Editor dialog box.
2. Enter the protocol name in the Protocol Name box at the top.
3. For each phase in the protocol:
(a) Select “new” in the Stage list.
(b) Enter a phase name in the Description box.
(c) Select the required option from the Clip Capture drop-down list.
(d) Select the number of loops to acquire (per view in the selected phase) in the
Loops list (for non-continuous stages).
(e) Select the type: exercise or drug.
4. For each view (all views display for each phase):
(a) Select “new” in the View list.
(b) Select a standard view from the Standard View list.
5. Click [Save] to save changes and then click [Quit] to remove the Protocol Editor dialog
box from the screen.
Editing or Deleting a Stress Echo Protocol
To delete a protocol:
Select the protocol or one of its component phases or views and then click [Delete].
To Edit a Stress Echo Protocol:
Method one:
1. Select the [Load] button on the right.
The system displays the Select Protocol to load window.
2. Select the protocol and then click [OK].
The system displays the name of the selected protocol in the Protocol Name box and
lists the protocol's phases and views.
3. To change the name of the protocol, enter the required name in the Protocol Name
box.
4. To change the name of a phase, select the phase and then enter the required name in
the Description box.
5. To change the type of clip capture (continuous or retrospective), select the
appropriate option from the Clip Capture drop-down list.
6. To change the number of loops acquired for each view in a phase, select the phase
and then select the required number from the Loops list (for retrospective stages).
7. To change the type of stage, select exercise or drug in the drop-down list.
8. To delete a phase or view, select the phase or view and then press the <Del> key on
the keyboard.
9. Click [Save] to save changes and then click [Quit] to remove the Protocol Editor dialog
box from the screen.
Method two:
1. Click an available protocol on the Select Protocol screen.
2. Click [Protocol Editor] to enter the Protocol Editor screen.
3. Follow the steps 3-8 above to finish the protocol editing.
You cannot edit a protocol during Acquire Mode.