Mindray DC-T6, Operator'S Manual

Page: 162 / 347

6-8 Stress Echo
systole to end systole and then reversed from end systole to beginning systole. You can
change the speed of playback and you can display a specific frame.
„ To playback the displayed loops
1. Select (highlight) the Toggle Play toolbar button at the top of the screen.
The system plays the displayed loops in one direction, from beginning systole to end
systole. When the last frame is played, the system restarts playback from the first
frame.
2. To stop playing the displayed loops, select the Toggle Play toolbar button again.
„
To playback the displayed loops in both directions (from diastole to systole and then
back to diastole)
Select (highlight) the Sweeping play toolbar button at the top of the screen.
The system initially plays the displayed loops in one direction, from beginning systole
to end systole. When the last frame is played, the system reverses the playback
direction, playing the displayed loops from end systole to beginning systole.
„ To change the playback speed
Select the Decrease Speed toolbar button or the Increase Speed toolbar button at the
top of the screen.
„ To display a specific frame in the loops
Select one of the following toolbar buttons at the top of the screen:
Start of sequence – displays the first frame of each loop.
Step backward – displays the previous frame of each loop.
Step forward – displays the next frame of each loop.
End of sequence – displays the last frame of each loop.
„ To set the cine segment
Drag the inverted triangle on the cine slider. Click [Apply Edit All] and the edit is
applied to all clips.
6.6 Wall Motion Scoring and Reports
The WMS-Report lists user-assigned wall motion scores and associated data. Reports
contain the entered indication, if any; and report also contains any entered comments that
are specific to the report. You can include or exclude data from specific phase(s). You can
preview and print the report for the currently selected mode. You can also enable colored
report printing in Maintenance.
Stress echo exam data and the reports can be sent to DICOM.
On the iStation page, if stress echo exam was performed on the patient, the patient exam
record will be marked with a tick in the SE Exam list.
6.6.1 Entering Indications or Comments for the
Reports
You can enter an indication for display in Stress Echo reports.
To enter an indication:
1. Select [Indication] on soft menu to open the Indication dialog box.
2. Use the keyboard to enter text into the Indication dialog box and then click [OK].