Lenovo x3650 M4 BD 5466, Installation And Service Manual

Page: 85 / 1222

Figure 56. Power information label
Step 10. If you are adding a power supply to the server, attach the redundant power information label that
comes with this option on the server cover near the power supplies.
1
xxx-xxx/
xxx-xxxV~
2
XXXW ~ AC
x,x/x,x A
xx/xx Hz
xxx-xxx/
xxx-xxxV~
XXXW ~ AC
x,x/x,x A
xx/xx Hz
Power supplies
0000
0000
00000
00000
00000
00
00
000
000
000
0000
0000
0000
00000
00000
00000
00000
Figure 57. Attaching the redundant power information label
Installing a hot-swap dc power supply
Use this information to install a hot-swap dc power supply.
The following notes describe the type of power supply that the server supports and other information that
you must consider when you install a power supply:
• Before you install an additional power supply or replace a power supply with one of a different wattage,
you may use the Power Configurator utility to determine current system power consumption. For more
information and to download the utility, go to http://www.ibm.com/systems/bladecenter/resources/
powerconfig.html.
• Before you install an additional power supply or replace a power supply with one of a different wattage,
go to Table 2 “Power supply configurations” on page 9 for detailed configurations.
• The server comes with one hot-swap 12-volt output power supply that connects to power supply bay 1.
The input voltage is -48 V dc or -60 V dc auto-sensing.
Chapter 2
.
Installing optional devices
73