Lenovo x3650 M4 BD 5466, Installation And Service Manual

Page: 336 / 1222

• Set the system date and time.
• Set the power-on password.
• Reconfigure the server.
See “Using the Setup utility” on page 145 for details.
Removing the operator information panel assembly
Use this information to remove the operator information panel assembly.
To remove the operator information panel, complete the following steps.
Step 1. Read the safety information that begins on “Safety” on page v and “Installation guidelines”
on page 34.
Step 2. Turn off the server and peripheral devices and disconnect the power cords and all external cables,
if necessary.
Step 3. Remove the cover (see “Removing the cover” on page 240).
Step 4. Disconnect the cable from the back of the operator information panel assembly.
Step 5. Pull up the blue points slightly on the rear of the panel toward the front of the server.
Operator information
panel
Figure 233. Operator information panel removal
Step 6. From the front of the server, carefully pull the assembly out of the server while you move it slightly
from side to side.
Step 7. If you are instructed to return the operator information panel assembly, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to you.
Replacing the operator information panel assembly
Use this information to replace the operator information panel assembly.
324
Lenovo System x3650 M4 Installation and Service Guide