Lenovo x3650 M4 BD 5466, Installation And Service Manual

Page: 69 / 1222

You can enable rank sparing memory in the Setup utility, select System Settings ➙ Memory . For more
information, see “Using the Setup utility” on page 145. When you use the memory rank sparing feature,
consider the following information:
• The memory rank sparing feature is supported on server models with an Intel Xeon™ E5-2600 series
microprocessor.
• The maximum available memory is reduced when memory rank sparing mode is enabled.
The following diagram lists the DIMM connectors on each memory channel.
Figure 40. Connectors on each memory channel
Follow the installation sequence for rank sparing mode:
• Install at least one quad-rank DIMM in a channel.
• Install at least two single-rank or dual-rank DIMMs in a channel.
Table 16. Memory rank sparing mode DIMM population sequence
Number of DIMMs
Number of installed
microprocessor
DIMM connector
First pair of DIMMs
1 1, 2
Second pair of DIMMs 1 4, 5
Third pair of DIMMs 1 8, 9
Fourth pair of DIMMs 1 11, 12
Fifth pair of DIMMs 1 7, 10
Sixth pair of DIMMs 1 3, 6
Seventh pair of DIMMs 2 13, 14
Eighth pair of DIMMs 2 16, 17
Ninth pair of DIMMs 2 20, 21
Tenth pair of DIMMs 2 23, 24
Eleventh pair of DIMMs 2 19, 22
Twelfth pair of DIMMs 2 15, 18
Note: DIMM connectors 3, 6, 7, 10, 15, 18, 19, and 22 are not used in memory rank sparing mode when UDIMMs
are installed in the server.
Installing a memory module
Use this information to install a memory module.
Chapter 2
.
Installing optional devices
57