Lenovo x3650 M4 BD 5466, Installation And Service Manual

Page: 354 / 1222

2. When you replace the system board, you must either update the server with the latest firmware or
restore the pre-existing firmware from a diskette or CD image. Make sure that you have the latest
firmware or a copy of the pre-existing firmware before you proceed. See “Updating the firmware”
on page 141, “Updating the Universal Unique Identifier (UUID)” on page 158, and “Updating the
DMI/SMBIOS data” on page 160 for more information.
3. When you replace the system board, make sure that you remove the Integrated Management Module
Advanced Upgrade and place it on the new system board. For information about the Advanced
Upgrade, see “Using the remote presence and blue-screen capture features” on page 153.
4. Reactivate any Features on Demand features. Instructions for automating the activation of features and
installing activation keys is in the Features on Demand User's Guide . To download the document, go to
https://fod.lenovo.com/lkms, log in, and click Help .
Important: Some cluster solutions require specific code levels or coordinated code updates. If the device
is part of a cluster solution, verify that the latest level of code is supported for the cluster solution before
you update the code.
To install the system board, complete the following steps:
Step 1. Read the safety information that begins on “Safety” on page v, “Handling static-sensitive devices”
on page 36, and “Installation guidelines” on page 34.
Step 2. Align the system board at an angle, as shown in the illustration; then, rotate and lower it flat and
slide it back toward the rear of the server. Make sure that the rear connectors extend through
the rear of the chassis.
342
Lenovo System x3650 M4 Installation and Service Guide