IAI IA-101-TT-USB, Operation Manual

Page: 317 / 392

13. How to Reset an
Absolute Encoder
309
(4) “PC Software for X-Sel” dialog box will appear on screen. If an error is detected, error message will appear.
This message will disappear by click “OK” button. In case of detection of “ABS unit encoder error (2)”,
following error message will appear on screen.
Fig. 13.162 ABS Unit Encoder Error Message
(5) Current Error status can be checked by selecting [Monitor (M)] - [Error detail information (E)]. Following
figure is an example of “ABS Unit Encoder Error (2)” (example of when using simple absolute unit as
primary axis). Close dialog box window after checking error detail information.
Fig. 13.163 Error Detail Information