IAI IA-101-TT-USB, Operation Manual

Page: 202 / 392

10. Coordinate System Definition Data Edit W
indow
194
Fig. 10.16 Simple Interference Check Zone Definition Coordinates Setting Screen
(X-SEL-RXD/SXD, RAXD/SAXD)
Zone No.: Indicates the zone number.
Coordinate No.: Indicates the coordinate number. Coordinate 1 and Coordinate 2 are available.
Physical/Expansion Output Port No./Global Flag No.:
Select a desired output number to be output when the axis enters the check zone.
(In the case of the X-SEL-RX/SX, RXD/SXD, RAX/SAX, RAXD/SAXD controller, an
expansion output port number can also be entered.)
Error Type: Select a desired type of errors.
0 = Do not handle errors.
1 = Output message level errors.
2 = Output operation-cancellation level errors.
(For Axis 5 to Axis 8, this item is displayed only on the X-SEL/RXD/SXD, RAXD/SAXD
controller.)
(Note) Contact area data for two SCARA robots (Axis 1 to Axis 4, and Axis 5 to Axis 8) cannot be set for
one check zone.