13. How to Reset an
Absolute Encoder
316
3) In case there is a concern that a load may interfere with surroundings at the absolute reset, detach
the load.
Have the work during the emergency stop condition. After the work is finished, click on the “OK”
button.
<For 4-Axis Type>
Fig. 13.175 Confirmation Window
<For 3-Axis Type>
Fig. 13 176 Confirmation Window
4) By referring to the displayed movement direction for each axis, adjust the axes to the initial posture.
The posture differs depending on the movement direction. Make sure the work is conducted with the
emergency stop activated when moving the axes by hand. Click on the “OK” button after the work is
finished.
<For 4-Axis Type>
Fig. 13.177 Confirmation Window
<For 3-Axis Type>
Fig. 13 178 Confirmation Window
Summary of Contents for IA-101-TT-USB
