IAI IA-101-TT-USB, Operation Manual

Page: 262 / 392

13. How to Reset an
Absolute Encoder
254
5) Click “Execution” button.
Fig. 13.57 Execution Window
6) A Warning window shows up. Click “Yes”. Each operation for the push type absolute reset starts.
Fig. 13.58 Warning Window
7) Once the push type absolute reset for all the axes is finished, the Information window will appear. Click
“OK” button.
Fig. 13.59 Information Window
8) Close the Push stopper position acquisition window by clicking “  “ on the upper right side of the
window. Once the window is closed, the parameters start to be written automatically to the flash ROM,
and controller is rebooted by the software reset.