IAI IA-101-TT-USB, Operation Manual

Page: 282 / 392

13. How to Reset an
Absolute Encoder
274
6) A Warning window shows up. Click “Yes”. Process to acquire the push stopper position will start.
Fig. 13.102 Warning Window
7) Once the push stopper position acquisition is complete, the Information window will appear. Click “OK”
button.
Fig. 13.103 Information Window
8) When finishing the process, click “

“ on the upper right side of the window. Once the window is closed,
the parameters start to be written automatically to the flash ROM, and controller is rebooted by the
software reset.
9) Once the controller reboot is finished, conduct the push type absolute reset on the axis with the push
stopper position acquisition.