9. Symbol Edit W
indow
178
9.3 Saving Symbol Data and Closing the Edit Window
(1) Saving to a file the symbol data you are editing
Click the Save to File button in the symbol edit window.
This is the same as clicking File (F) and then selecting Save As (A).
After clicking Save to File button, File Save Select screen will be displayed.
For the X-SEL-P/Q, PX/QX controller compatible with increased memory (with gateway function), symbols
of programs No.65 or later and positions No.4001 or later cannot be saves by the Symbol File Format 1
(normal format).
In case of the SSEL controller, you can not select the Symbol File Format 1 (normal format) for Program
No. 65 or later, Position No.1501 or later. Number of Symbol is MAX500.
Save them by the Symbol File Format 2 (extended format)
(PC interface software version 7.2.0.0 or later)
Fig. 9.6 File Save Select Screen
(2) Transferring to the controller the symbol data you are editing You can save the symbol data you are
editing to the controller’s memory.
Click the Transfer to Controller button in the symbol edit window.
This button is selectable only in the online edit mode.
* The data saved by Symbol File Format 1 (normal format) can be transferred to the X-SEL-P/Q, PX/QX
(with gateway function), SSEL controller compatible with increased memory.
All symbols having been saved in the controller before transferring will be cleared.
* The data saved by Symbol File Format 2 (extended format) can be transferred to a controller
incompatible with increased memory. All symbols having been saved in the controller before transferring
will be cleared.
Caution: After placing a check mark at
‘Save it by format2 always.’
the data will be always saved
with Format 2 and this
screen will not be displayed
again. For displaying this
screen, go to the
Environment Setup screen
(15. Tool).
Summary of Contents for IA-101-TT-USB
