IAI IA-101-TT-USB, Operation Manual

Page: 217 / 392

11. Monitor
209
In the case of the X-SEL-R/S, RX/SX, RXD/SXD, RA/SA, RAX/SAX, RAXD/SAXD, TTA and MSEL
controller, the header of the time of error column displayed as part of detailed error information becomes
“Data (time the error occurred)” instead of “After Reset (elapsed time after the reset).”
Fig. 11.21 Detailed Error Information (When the XSEL-R/S, RX/SX, RXD/SXD, RA/SA, RAX/SAX,
RAXD/SAXD, TTA and MSEL controllers’ calendar function is used)
(Note) If date & time data is lost, the following error occurs. In this case, the date & time data becomes
2000/01/01 00:00:00.
Fig. 11.22 Error Display
(Note) Refer to 14.4, “Setting Time” for how to set the internal clock of the controller.
(Note) When bits 0 to 3 of Other parameter No. 47, “Other setting bit pattern 2” are set to 2, (Do not use
the calendar function (use the elapsed time after the reset)), the header of the time of error
column becomes “After Reset (elapsed time after the reset).”
(The factory default for bits 0 to 3 of Other parameter No. 47, “Other setting bit pattern 2” is 1
(Use the calendar function).)