Simple connectivity.
convenient noiSe-at-work
compliance.
JABRA GN1220
JABRA
®
is A ReGisteRed tRAdemARk of GN Netcom A/s
www.JABRA.com
The Jabra GN1220 is a cord offering inexpensive connectivity
to a wealth of telephone systems and no nonsense, hassle-free
compliance with the latest in EU noise regulations. The Jabra
GN1220 is part of the Jabra GN1200 Series and builds on the
same intuitive-to-use design.
- Makes our most popular corded headsets compliant with EU
Noise-at-work directive (EN 2003/10/EC)*
- Works with most desk phones including IP hard phones
- Microphone amplification when required
- Simple 8-position slide adjustment means no need for a user
manual (QD to RJ9 variant only)
Aside from complying with noise-at-work regulation the Jabra
GN1220 is the answer to a common issue. When hooking up
a new headset there is not always a dial tone. The problem
could be the headset or the telephone? But chances are it is the
cord. Even though the headset and telephone may be plug-com-
patible, the wiring is determined by the individual telephone
manufacturer.
The Jabra GN1220 (QD to RJ9) features eight separate wire con-
figurations - including three with built-in microphone amplifica-
tion. Simply connect the Jabra GN1220 and headset through the
QD (Quick Disconnect) plug and flick the slide from one position
to the next until a dial tone is heard. It’s as simple as that!
Noise-at-work compliance has never been more convenient.
dAtAsheet
Jabra GN1220
Jabra GN1220 is available in two variants to fit almost any
need:
- QD to RJ9 with straight cord
- for connecting most telephones on the market to our most
popular headsets
- QD to QD with straight cord
- designed for GN Ellipse (when used with GN2000, GN2100
and GN2200)
