IAI IA-101-TT-USB, Operation Manual

Page: 369 / 392

14. Supplemental Information
on Controller Menu Items
361
14.10.3 Excel File Create and Edit
When creating and editing the position data in Microsoft Office Excel and reading out in the XSEL PC software,
input the title line in the first line of the first Excel sheet, and input the position data from the second line.
Or, by creating a new file and save it with a name in the XSEL PC software, an Excel file with title line and
number column are already input can be generated. With using this file, create and edit the position data on
the Excel sheet.
[Refer to 14.10.1 “Position Data Format” for the title line]
14.10.4 Caution
(1) Do not attempt to input any information except for those described in the position data format to the title
line and position number column. Doing so will disturbs reading the data correctly.
In the area hatched in the figure below can be used for free input.
(Note) Once the file gets overwritten in the XSEL PC software, the data input in the hatched area will all
be deleted.
Fig. 14.16 Position Data Input Area
(2) If there is a restriction on the edit or readout of the Excel file, it will cause a file readout error.
(3) If you work on Microsoft Office Excel while the file is being saved or read out, file save or readout could
fail.