IAI IA-101-TT-USB, Operation Manual

Page: 118 / 392

4. Program Edit W
indow
110
4.3 Saving All Programs to a File
(1) Saving all programs to a file
You can save programs No. 1 to 64 in the controller (or programs No. 1 to 128 for XSEL-P/Q and PX/QX
(with gateway function) complied with increased memory, or programs No. 1 to 128 for R/S, RX/SX and
RXD/SXD, compatible with increased memory SSEL or programs No. 1 to 255 for XSEL-RA/SA,
RAX/SAX, RAXD/SAXD, TTA and MSEL) to a single file.
[1] Click Program from the menu bar, and then select Save to File.
[2] In the program number selection window, click Save All . Then specify a desired file name and
folder.
Fig.4.23 Program Save
(2) Opening the all programs file
[1] Click File from the menu bar, and then select Open.
[2] In the file open window, select the file you want to open and then click Open.
[3] The program No. selection window will be displayed. Select a desired program No. to read and click
the Read button.
If you want to transfer all programs to the controller, select Load All Program. If you want to select
programs in the all programs file and transfer them individually, select desired program numbers and
then click Load a Program to transfer the corresponding programs to the controller.
Fig. 4.24 Program Transfer (Online)
Print All button: Print all programs (excluding the program with 0 steps).
Print button: Print only the program selected from the list at the left of the button.
In the case of the SSEL, ASEL, and
PSEL controllers, the number of
remaining steps will be 2000 or less.
The total number of steps should be
9999 or below for SSEL applicable for
memory capacity increase.
In the case of the SSEL, ASEL, and PSEL
controllers, the number of remaining steps
will be 2000 or less.
The total number of steps should be 9999
or below for SSEL applicable for memory
capacity increase.