IAI IA-101-TT-USB, Operation Manual

Page: 154 / 392

6. Position Data Edit W
indow
146
This is not displayed for
XSEL-RA/SA, RAX/SAX,
RAXD/SAXD, SSEL,
ASEL and PSEL.
(3) Writing to the flash ROM
Once the position has been transferred to the controller, the following confirmation dialog box with the
message, “Write Flash ROM?” will be displayed.
Fig. 6.51 Confirmation Fig. 6.52 Confirmation
(X-SEL-J/K, P/Q, TT, SSEL, ASEL, PSEL, (X-SEL-JX/KX, PX/QX)
TTA, MSE-PCX/PGX)
In case of SSEL, ASEL, PSEL, X-SEL-P/Q and PX/QX compatible with increased memory (with gateway
function), or R/S, RX/SX, RXD/SXD, RA/SA, RAX/SAX and RAXD/SAXD the following screens will be
displayed. (PC interface software version 7.2.0.0 or later)
Fig. 6.53 Confirmation Fig. 6.54 Confirmation
(X-SEL-P/Q, R/S, RX/SX, (X-SEL-PX/QX)
RXD/SXD, RA/SA, RAX/SAX,
RAXD/SAXD, SSEL, ASEL, PSEL)
Click and select a desired item (Position, etc.) to write to the flash ROM.
Click Yes→ The memory data will be written to the flash ROM.
Click No → The memory data will not be written to the flash ROM.
* The number of writing to the flash ROM is limited (approx. 100,000 times). If you do not write all the data,
select Write Selected Data Region and write to the flash ROM.