IAI IA-101-TT-USB, Operation Manual

Page: 122 / 392

4. Program Edit W
indow
114
4.5 Cycle Time Measurement
Target Controller : XSEL-RA/SA/RAX/SAX/RAXD/SAXD (Main CPU application version V1.10 and
later)
By setting up the measurement start point and end point in the program, the cycle time during program
operation can be measured. (V13.02.00.00 and later)
4.5.1 How to Measure Cycle Time
Select Program (S)

Edit (E) and Program Number Select window appears.
Select a program to operate and click Read.
Program Edit window appears.
Column T (marked in red box), which is for the setup of measurement start point and end point for cycle time
measurement, should be shown in Program Edit window.
Fig. 4.29 Program Edit window
There are three types of setting in the setup in Column T.

S : Cycle Time Measurement Start Point
 E : Cycle Time Measurement End Point

SE : Measurement Point for Cycle Time Measurement for One Step Only
Column T