IAI IA-101-TT-USB, Operation Manual

Page: 130 / 392

5. Copying/Moving/Clearing a Program
122
In the case of the SSEL, ASEL, and
PSEL controllers, the number of
remaining steps will be 2000 or less.
The total number of steps should be
9999 or below for SSEL applicable
for memory capacity increase.
5.2 Program Clear Window
The steps to clear a program are explained below.
(1) Click Program (S) from the menu bar, and then select Clear (L).
(2) The program clear window will open.
Fig. 5.6 Program Clear
Click the program you want to clear.
You can select multiple programs by dragging the mouse or pressing the Ctrl key and ↑↓ key
simultaneously.
Next, click Clear.
(This operation is done in the memory.)
Clicking Cancel will cancel the operation.
When clearing all programs in the controller, click the All Clear button.
(3) Writing to the flash ROM
When the clear is completed, the following confirmation dialog box with the message, “Write Flash
ROM?” will be displayed.
Fig. 5.7 Confirmation Fig. 5.8 Confirmation
(X-SEL-J/K, P/Q, TT, SSEL, ASEL, PSEL (X-SEL-JX/KX, PX/QX)
TTA, MSEL-PCX/PGX)