IAI IA-101-TT-USB, Operation Manual

Page: 331 / 392

13. How to Reset an
Absolute Encoder
323
5) Click on the “Execution” button.
Fig. 13.193 Execution Window
6) A Warning window shows up. Click on the “Yes”. Each operation for the push type absolute reset
starts.
Fig. 13.194 Warning Window
7) Once the push type absolute reset, the Information window will appear.
Click “OK” button.
Fig. 13.195 Information Window
8) If it is necessary to have the push type absolute reset for another axis, move on to the axis selection.
When finishing the process, click “×” on the upper right side of the window. Once the window is
closed, the parameters start to be written automatically to the flash ROM, and controller is rebooted
by the software reset.