background image

IS-F-RFK-FS-825-Cellular 

Installation Instructions 

Cellular Flood Sensor 

Retrofit Connection Kit 

Series 825Y, LF825Y 
Series 825YA, LF825YA 

3

4

" – 2" 

Read this Manual BEFORE using this equipment. 

Failure to read and follow all safety and use 

information can result in death, serious personal 

injury, property damage, or damage to the 

equipment. 

Keep this Manual for future reference. 

You are required to consult the local building and plumbing codes prior 

to installation. If the information in this manual is not consistent with 

local building or plumbing codes, the local codes should be followed. 

Inquire with governing authorities for additional local requirements. 

NOTICE

 

Use of the SentryPlus Alert

®

 technology does not replace 

the need to comply with all required instructions, codes, 

and regulations related to the installation, operation, and 

maintenance of the backflow preventer to which it is 

attached, including the need to provide proper drainage 

in the event of a discharge. 
Watts

®

 is not responsible for the failure of alerts due to 

connectivity or power issues. 

Monitor relief valve discharge with smart and connected sen­

sor technology to detect flooding and transmit notification. 

The Cellular Flood Sensor Retrofit Connection Kit upgrades 

existing installations by integrating and activating the sensor 

to enable functions for flood detection. When excessive 

relief valve discharge occurs, the sensor energizes a relay 

signaling flood detection and triggers real-time notification of 

potential flood conditions through the Syncta

SM

 application. 

Contents 

Kit Components  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 

Install the Flood Sensor and Activation Module. . . . . . . . . . 3 

Custom Flood Sensor Settings   . . . . . . . . . . . . . . . . . . . . . 3 

Set Up the Cellular Gateway . . . . . . . . . . . . . . . . . . . . . . . . 4 

Verify the Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 

Configure the Syncta App . . . . . . . . . . . . . . . . . . . . . . . . . . 5 

Summary of Contents for FEBCO 825Y Series





































Reviews: