manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 97

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-45

COPY: Copy Form

Each variable-length, blocked record begins with a word that contains the 
length of the record, and the read count equals the value of that length 
indicator. You cannot use the TRIM option with VARIN, and this option works 
only with tapes written by FUP.

out-option

controls the handling of the output file. 

out-option

 is not normally used with 

structured disk files.

BLOCKOUT out-block-length

sets the number of bytes in an output block. Specify 

out-block-length

 as 

an integer in the range 1 through 32,767. This value is the maximum number of 
bytes to be written in a single physical operation. If a value greater than 32,767 
is specified, FUP issues this error message and then aborts:

ERROR - TAPE DEFINE BLOCKLEN VALUE TOO LARGE

If you specify BLOCKOUT and 

out-filename

 is not a tape DEFINE:

If the output-block length is greater than the output-record length, output-
record blocking occurs. The block is filled with 

out-record-length

 

records until it contains 

out-block-length

 bytes or the last output 

record is encountered.

If 

out-block-length

 is not a multiple of 

out-record-length

, the last 

record in a full block is truncated.

If the write count for a record is less than 

out-record-length

, the 

output record is padded in the output block with trailing nulls.

The actual number of bytes written in a physical operation is 

out-block-length

 for all blocks (except the last). If the last block is not 

full, the actual number of bytes written is equal to the number of records in 
the last block multiplied by 

out-record-length

.

If you specify the BLOCKOUT option and 

out-filename

 is a tape DEFINE 

with these attributes, you must not specify the BLOCKLEN attribute of the 
DEFINE, or the BLOCKLEN attribute must match 

out-block-length

:

LABELS set for labeled tape processing

USE set to OUT (or not specified)

If you do not specify BLOCKLEN, it is set to 

out-block-length

 for the life of 

the FUP command.

If you omit the BLOCKOUT option, and 

out-filename

 is a tape DEFINE with 

these attributes, then FUP sets 

out-block-length

 to the BLOCKLEN value 

of the DEFINE:

LABELS set to labeled tape processing

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands