manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 119

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-67

DUP[LICATE]

KEEP

does not duplicate any files that exist in both 

to-fileset

 and 

from-fileset-list

. If a file specified in 

to-fileset

 already exists, the 

corresponding file in 

from-fileset-list

 is not duplicated. FUP lists the names 

of the files that are not duplicated. Checking is by name only. No file attributes are 
checked.

FUP uses only one of these options: KEEP, NEW, OLD, or PURGE. If more than 
one is specified, FUP uses the last one specified.

NEW

specifies that no file in 

to-fileset

 exists. For each file in 

from-fileset-list

, FUP creates a new file with characteristics identical to the 

corresponding input file. The default mode is NEW.

FUP uses only one of these options: KEEP, NEW, OLD, or PURGE. If more than 
one is specified, FUP uses the last one specified.

OLD

specifies that each file in 

to-fileset

 must already exist. The characteristics of 

each file in 

to-fileset

 must match the characteristics of the corresponding file 

in 

from-fileset-list

 in these areas (if applicable): file type, record size, data-

block size, data and index compression mode, and key length and key offset.

The extent size of the files in 

to-fileset

 might differ. The files you specify for 

to-fileset

 must be large enough to contain the 

from-fileset

 data. Existing 

data in 

to-fileset

 is overwritten.

FUP uses only one of these options: KEEP, NEW, OLD, or PURGE. If more than 
one is specified, FUP uses the last one specified.

PURGE

purges any existing file in 

to-fileset

 that has the same name as a file in the 

from-fileset

. If a file currently exists with the same name as a destination file, 

FUP purges the current contents of the file. FUP creates a new file, with identical 
characteristics, for each file in the 

from-fileset-list

.

FUP uses only one of these options: KEEP, NEW, OLD, or PURGE. If more than 
one is specified, FUP uses the last one specified.

PARTONLY

specifies that if 

from-fileset-list

 defines any primary or secondary partitions 

of a partitioned file, only those partitions (and any nonpartitioned files) are to be 
duplicated. Entire partitioned files are not duplicated.

Secondary partitions defined by 

from-fileset-list

 are not duplicated unless 

you specify PARTONLY.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands