manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 91

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-39

COPY: Copy Form

KEY { record-spec | key-value }

specifies the primary-key value for the starting record of a disk file. FUP 
begins reading the input file at the record you name with KEY.

Specify 

record-spec

 as an integer in the range 0 through 4,294,967,295.

For unstructured files, give the starting relative byte address for 

record-spec

.

For relative files, give the starting record number for 

record-spec

.

For entry-sequenced files, give the record address for 

record-spec

.

To indicate the approximate position of the starting record for key-
sequenced files, use 

key-value

. Specify 

key-value

 as 

string

 or:

"[" { string } [ , string ] ... "]"
    { 0:255  } [ , 0:255  ]

You can specify a list of strings with each string enclosed by quotation 
marks or integers representing byte values in the range 0 through 255. You 
must enclose the list of strings and integers (if specified) in square 
brackets. 

For example, specify a key value as the ASCII string “T905”, followed by a 
word containing the integer value zero, and a word containing the integer 
value nine:

[ "T905", 0, 0, 0, 9 ]

KEY64 { record-spec }

specifies the 64-bit key value for the starting record of an entry-sequenced 
file. FUP begins reading the input file at the record you name as KEY64.

key-specifier

is a one-character or two-character string (located inside quotation marks) 
specifying the alternate key to use for positioning purposes.

ALTKEY key-value

specifies the alternate key of the starting record for a key-sequenced disk 
file. FUP begins reading the input file at the specified record and obtains 
subsequent rows in alternate key order. Specify 

key-value

 for key-

sequenced files as described in 

KEY { record-spec | key-value }

 on 

page 2-39.

Note.

The brackets in 

key-value

 syntax are enclosed in quotation marks to 

indicate that they are part of the parameter—not to indicate that the parameter is 
optional. Do not include the quotation marks when you type the brackets.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands