manualshive.com logo in svg

HP G08, Reference Manual

Share
Download
HP G08 Reference Manual Download Page 63

FUP Commands

File Utility Program (FUP) Reference Manual—523323-014

2-11

ALTER Parameters for All File Types

CODE file-code

alters the file code. Specify 

file-code

 as an integer from 0 through 65,535. The 

default 

file-code

 is zero. File codes 100 through 999 are reserved for use by 

HP. 

LOCKLENGTH generic-lock-key-length

is the lock-key length. The generic lock-key length determines the grouping of 
records that share a single lock. The value specified must be between zero and the 
key length of the file.

MAXEXTENTS maximum-extents

sets the maximum number of extents to allocate (for nonpartitioned files only). 
Specify 

maximum-extents

 as an integer from 16 through 

n

, where 

n

 is a 

maximum value determined by the amount of free space in the file label. FUP 
rounds any value you set from 1 through 15 up to 16. The absolute maximum is 
978 extents. The default is 16.

You cannot always allocate all the extents specified by 

maximum-extents

. The 

actual number of extents that you can allocate depends on the amount of space in 
the file label. If there are alternate keys or partitions, the maximum number of 
extents allowed is fewer than 978.

If you specify MAXEXTENTS and the file is Format 1, you must consider the 
primary and secondary extent sizes to avoid exceeding the maximum file size for a 
Format 1 file. When the primary and secondary extent size with the specified 
MAXEXTENT size is larger than two gigabytes, the ALTER operation rejects the 
request with file-system error 21 (illegal count specified) if the file is Format 1.

When the primary and secondary extent size with the specified MAXEXTENT size 
is larger than four gigabytes, the ALTER operation rejects the request with file-
system error 12 (file in use) if the file is: 

format 2 file that is not key-sequenced and not partitioned

format 2 partitioned file that is key-sequenced and the operation is performed 
on other than the base partition  

currently less than 4 gigabytes 

currently opened by another process

If the file is a partitioned file that is not key-sequenced, the ALTER operation 
rejects the request with file-system error 2 (operation not allowed on this type of 
file).

Note.

For a list of reserved file codes, see 

Table 2-2, System File Code Definitions,

 on 

page 2-90.

Summary of Contents for G08







































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands